- Size: 9.5 fl. oz. Cartridge
- A Two-Component Adhesive Anchoring System
- Designed For Bonding Threaded Rod And Reinforcing Bar Hardware Into Drilled Holes In Concrete Base Materials
- Epoxy Is Automatically Mixed When Dispensed Through Nozzle
- Be Sure That Hole Is Properly Cleaned Of All Dust And Debris Prior To Injection Of Epoxy
- Hole Should Be Filled Approximately 2/3 With Epoxy From The Back
- Then Insert Anchoring System Or Rod While Turning To Ensure Positive Adhesive Distribution
- Allow The Epoxy To Fully Cure Prior To Applying Any Load
- Working And Curing Time Varies Drastically Depending On Base Material Temperature
- See Chart (On Cartridge) For Reference Of Times And Temperatures
- Extra Mixing Nozzles Available (RAW08293)
No one has reviewed this product!
Write a Review
